Philips HD8327/47 manual Using Coffee Pods, Tips for Choosing Coffee, HOT Water, Hands

5.2 Using Coffee Pods

•(Fig.9) - Use a coffee spoon to remove the fi lter for ground coffee (14) from the pressurized fi lter holder (12).

•(Fig.10) - Insert the coffee pod adapter (15) - with the convex part facing down - into the pressurized fi lter holder (12).

•(Fig.11) - Then, insert the pod fi lter (16) into the pressurized fi lter holder (12).

•(Fig.13) - Insert the pressurized fi lter holder into the brew unit (8) from the bottom.

•(Fig.14) - Turn the fi lter holder from left to right until it locks into place. Release the grip from the pressurized fi lter holder. The handle is automatically slightly turned leftwards.

This movement guarantees proper pressurized fi lter holder performance.

•(Fig.16) - Preheat the pressurized fi lter holder by switching the selection knob (17) to the "" position until some water spills out of it. This is to be done only for the fi rst coffee brewing.

•(Fig.17) -When 150 cc of water have fl owed out, set the selection knob (17) to the "" position to stop brewing.

•(Fig.19) - Remove the pressurized fi lter holder from the machine by turning it from right to left and pour out any water left.

•(Fig.12) - Insert the pod into the fi lter holder and make sure the paper of the pod does not overhang the fi lter holder.

•(Fig.13) - Insert the pressurized fi lter holder into the brew unit (8) from the bottom.

•(Fig.14) - Turn the fi lter holder from left to right until it locks into place.

•Take 1 preheated cup and place it under the fi lter holder. Check that it is correctly placed under the coffee brewing nozzles.

•(Fig.16) - Switch the selection knob (17) to the "" position.

•(Fig.17) - When the desired quantity of coffee has been obtained, turn the selection knob (17) to the "" position to stop coffee brewing, and then remove the coffee cup.

•(Fig.19) - Wait a few seconds after brewing, then remove the fi lter holder and dispose of the used pod.

Important Note: The filter (16) and the adapter

(15)should be kept clean to guarantee perfect results. Clean daily after use.

6TIPS FOR CHOOSING COFFEE

As a general rule any type of coffee available on the market can be used. However, coffee is a natural product and its fl avour changes according to its origin and blend; it is therefore a good idea to try different types of coffee in order to fi nd the most suited to your personal taste.

For optimal results, we recommend using espresso machine blends. As a rule, coffee should always come out of the pressurized fi lter holder, without dripping.

The coffee brewing speed can be modifi ed by slightly changing the amount of coffee in the fi lter and/or using a different coffee grind.

Saeco recommends using ESE single-dose coffee pods for a tasty coffee and easier cleaning and preparing.

BEFORE PERFORMING ANY OPERATIONS RELATED TO HOT WATER/STEAM DISPENSING, MAKE SURE THAT THE STEAM WAND (PANNARELLO) IS DIRECTED OVER

THE WATER RECOVERY TRAY.

7HOT WATER

Danger of scalding! Dispensing may be preceded by small jets of hot water. The wand can reach high temperatures: Do not touch it directly with bare

hands.

•Press the ON/OFF button (11) and switch it to the "I" position.

•Wait until the "machine ready" light (20) turns on. The machine is now ready.

•(Fig.21) - Place a container or a tea glass under the steam wand (Pannarello).

•(Fig.21) - Open the knob (3) by turning it counter- clockwise.

•(Fig.22) - Set the selection knob (17) to the "" position.

•(Fig.23) - When the desired quantity of hot water has been dispensed, set the selection knob (17) to the "" position.

•(Fig.24) - Close the knob (3) by turning it clockwise.

•Remove the hot water container.

• 10 •