Philips HD8327/47 manual Coffee Brewing, Using Ground Coffee, Burns, Features, After use

•(Fig.4) - Place a container under the steam wand (Pannarello).

Open the knob (3) by turning it counter-clockwise.

(Fig.5) - Set the selection knob (17) to the "" position.

•Dispense the whole water tank content from the steam/

hot water wand (Pannarello). To end the operation, set the selection knob (17) to the "" position and close the knob

(3)by turning it clockwise.

•(Fig.2) - Fill the tank with fresh drinking water.

•(Fig.13-14) - Insert the fi lter holder into the brew unit (8) from the bottom and turn it from left to right until it locks into place.

•(Fig.15) - Place a suitable container under the fi lter holder.

•(Fig.16) - Turn the selection knob (17) to the "" position and dispense all the water in the tank.

(Fig.17) - Once the tank is empty, stop dispensing and switch the selection knob (17) to the "" position.

•Fill the tank again and wait until the "machine ready" light

(20)turns on.

•(Fig.19) - Remove the fi lter holder from the unit by turning it from right to left and rinse it with fresh drinking water.

The machine is now ready; please see related sections for operating details on how to brew coffee and dispense steam.

5COFFEE BREWING

Warning! During the coffee brewing it is forbidden to remove the pressurized filter holder by manually turning it clockwise. Danger of

burns.

•During this operation, the "machine ready" light (20) may fl ash; this is to be considered as a standard and not a faulty operating mode.

•Before using the machine, make sure that the hot water/ steam knob (3) is closed and that there is enough water in the tank.

•Press the ON/OFF button (11) and switch it to the "I" position.

•Wait until the "machine ready" light (20) turns on. The machine is now ready for coffee brewing.

Accessories for coffee brewing are placed in

a specially designed seat to make operations easy and immediate.

If the ground coffee measuring scoop and/or the filters are required, lift the cover (2) and take what you need (Fig.35 e Fig.36).

5.1Using Ground Coffee

•(Fig.7) - Insert the fi lter (14) in the pressurized fi lter holder (12); the fi lter is already inserted when using the machine for the fi rst time.

•(Fig.13) - Insert the fi lter holder into the brew unit (8) from the bottom.

•(Fig.14) - Turn the fi lter holder from left to right until it locks into place. Release the pressurized fi lter holder grip. The handle will slightly turn to the left. This movement guarantees proper fi lter holder performance.

•(Fig.16) - Preheat the pressurized fi lter holder by switching the selection knob (17) to the "" position until some water spills out of it. This is to be done only for the fi rst coffee brewing.

•(Fig.17) -When 150 cc of water have fl owed out, set the selection knob (17) to the "" position to stop brewing.

•(Fig.19) - Remove the fi lter holder from the machine by turning it from right to left and pour out any water left. As the machine is fi tted with the special fi lter (14), there is no need to change the fi lter to make one or two coffees.

•(Fig.35) - Remove the measuring scoop from the machine.

•(Fig.8) - Add 1-1.5 measuring scoop(s) for single coffee and 2 measuring scoops for double coffee. Remove any coffee residues from the rim of the fi lter holder.

•(Fig.13) - Insert the fi lter holder (12) into the brew unit (8) from the bottom.

•(Fig.14) - Turn the fi lter holder from left to right until it locks into place.

•(Fig.15) - Take 1 or 2 preheated cups and place them under the pressurized fi lter holder. Make sure that they are correctly placed under the coffee brewing nozzles.

•(Fig.14) - Switch the selection knob (17) to the "" position.

•When the desired quantity of coffee has been obtained, turn the selection knob (17) to the "" position to stop coffee brewing. Wait a few seconds after brewing has stopped, then remove the cups of coffee (Fig.18).

•(Fig.19) - Remove the pressurized fi lter holder and empty out the remaining coffee residues.

Note: If a small quantity of water remains in the filter holder, this has to be considered as absolutely normal and is due to the filter holder

features.

Important Note: The filter (14) should be kept clean to guarantee perfect results. Clean daily

after use.

English

• 9 •