Setting Up Your Range
Setting the Clock (after power to the range has been off)
•Always set the clock after installation or after a power failure. Once power returns to the oven, the clock defaults to 12:00 am.
•The time of day is displayed in hours and minutes.
•The clock time will appear during all oven operations except when the timer operation is running. Turn knob to display clock when timer is running.
•The oven is preset to a
•The clock display can also be turned off (See Clock Display, Page 7).
Note: To switch to a 24 hr. clock, see "Select Functions” section.
Getting Started Use
1.CLOCK will be displayed and the hour digits will flash.
2.Turn knob to select hour and AM or PM.
3.Touch TIME. CLOCK will still be displayed and the minute digits will flash.
4.Turn knob. Set minutes.
5.Touch TIME and the clock is now set.
12: 00 | AM | CLOCK |
|
| |
|
|
|
BEEP REMINDER
If operation is not completed, the oven will beep periodically as a reminder to set clock time. Push OFF.
- The Cooktop
Changing the Clock Time
1.Touch Time. TIMER 1 will flash in display.
2.Turn knob to select CLOCK .
3.Touch TIME again and hour digits will flash.
4.Turn knob to change hours.
5.Touch TIME again and minute digits will flash.
6.Turn knob to change minutes.
7.Touch TIME again and the clock is set.
0: 00 AM
HR:MIN | TIMER 1 |
TIMER |
|
Care and Cleaning
Helpful Hint
To cancel the TIME selection when setting the clock, touch OFF at any time while in the clock mode.
Self Help
English • 5