Care and Cleaning Use - The Cooktop Getting Started
Self Help
|
|
| Self Help - Cooktop | |
|
|
| POSSIBLE CAUSES & SUGGESTED SOLUTIONS | |
| COOKTOP PROBLEM |
| ||
|
|
|
|
|
| Burners click continuously. |
| Knob(s) are in the “light” position. Turn knob(s) to “OFF” position or to desired | |
|
| flame setting. | ||
|
|
| ||
|
|
|
|
|
| Surface burners do not light. |
| Gas is turned off. Make sure the gas | |
|
|
| gas supply to the house is not shut off. | |
|
|
|
|
|
|
|
| Unit is not hooked up to gas supply. Call gas company. | |
|
|
|
|
|
|
|
| Plug is not completely inserted into outlet. Incorrect house wiring. Check the | |
|
|
| power supply. Verify that the unit is grounded with the correct polarity. Make sure | |
|
|
| the unit is plugged in. | |
|
|
|
| |
|
|
| Circuit breaker is tripped. Check circuit breaker and reset if necessary. Check and/ | |
|
|
| or replace fuse. | |
|
|
|
|
|
|
|
| Burner ports are clogged. With the cooktop turned off and cool, remove burner | |
|
|
| caps. Use a stiff nylon bristle toothbrush to push debris through burner ports. | |
|
|
|
| |
|
|
| Misaligned burner cap. Verify that burner caps are properly positioned over | |
|
|
| burners. | |
|
|
|
|
|
|
|
| Ignitor is wet, damaged or dirty. Check ignitor for moisture. If wet, allow to air dry | |
|
|
| before using. Check for | |
|
|
| recommendations, page 23. Burner will not light if ignitor is wet, damaged or | |
|
|
| dirty. | |
|
|
|
|
|
| Uneven or too high flame, |
| Burner ports are clogged. With the cooktop turned off and cool, remove burner | |
| burner is hard to light. |
| caps. Use a stiff nylon bristle toothbrush to dislodge debris. | |
|
|
|
| |
|
|
| Misaligned burner cap. Verify that burner caps are properly positioned over | |
|
|
| burners. | |
|
|
|
|
|
|
|
| Burner cap is wet. Turn off burner, cool and dry burner cap and burner base | |
|
|
| throroughly. | |
|
|
|
| |
| Uneven flame - LP/ bottled |
| Call service. | |
| gas users. |
|
|
|
|
|
|
|
|