Oven Modes and Features
Oven Racks
HG25 models have two flat racks and one full extension | Pan Stops |
rack. HG24 models have three flat racks. The racks are | Back of Rack |
designed with a stop so they will stop before coming | Top Rack |
completely out of the oven and not tilt. |
|
Figure 1 - The Flat Rack
Getting
| with | back |
| wall | |
| Rack back |
|
toward |
| |
Insert |
|
|
| rack |
of | range |
of | Back of Rack |
|
Front of Rack
Bottom Rack
Stops | Rack | |
Guide | ||
|
Top
Rack
Rest
Front of Rack
Started
CAUTION:
To avoid possible burns, place oven racks in desired positions before turning the oven on. Always use oven mitts when the oven is warm. If a rack must be moved while the oven is hot, do not let oven mitts contact hot heating elements.
Removing from oven: Grasp rack firmly on both sides and pull rack toward you. When the stop is reached, tilt
rack up and pull the rest of the way out.
Replacing in oven: Grasp rack firmly on both sides. Tilt rack up to allow stop into rack holder. Bring rack to a horizontal position and push the rest of the way in. Rack
should be straight and flat, not crooked.
Note: The full extension rack must be in the closed position when removing and replacing. Grasp the entire
rack (both sections).
The Full Extension Rack (HG25 models only) allows for easier access to cooking foods. The bottom section extends as far as the standard flat rack. However, the top section extends beyond the bottom section bringing the food closer to the user. To order a full extension rack, contact Siemens Service:
Use: First, grasp the bottom section and pull straight out. Once the stop is reached, grasp the top section and pull
straight out until the second stop is reached. Cleaning: Clean rack with hot sudsy water. Dry
thoroughly. For stubborn dirt, use a soap filled steel wool
pad. DO NOT clean the rack in the self-cleaning oven.
The two sections of the rack are designed to come apart for easier cleaning. To do so, place rack on flat
surface in the closed position top side up. Rotate one side of top rack towards you until it is past the stop (ball). Pull
the rack up and out, rotated side first (See Figure 2). To reassemble rack, hold top rack diagonally across bottom
rack. Insert one side of top rack to closed position. Rotate the other side toward the back of the rack until it passes the stop (ball). Push top rack the rest of the way in (See Figure 3).
If the top rack will not extend fully, it is not installed correctly. Reinstall it so that the pan stop is in the back of the oven.
Figure 1 - The Full Extension Rack
Closed | Back of Rack |
Position |
|
Front of Rack
Figure 2 - Taking the Rack Apart
Closed
Position
Bottom Rack | Top Rack |
|
Closed | Back of Rack | |
Position | ||
|
Front of Rack
Figure 3 - Putting the Rack Together
CAUTION:
Always verify that top rack is installed correctly after reassembly. The back edges of the top rack must be under the rack guide on the bottom rack. DO NOT simply rest the top rack on top of the bottom one.
Use - TheOvenCooktop Care and Cleaning
Self Help
English • 11