ge.com
SURFACE BURNERS
Adjust the burner flame size so it does not extend beyond the edge of the cookware. Excessive flame is hazardous.
Safety Instructions
■Do not leave plastic items on the cooktop— they may melt if left too close to the vent.
■Keep all plastics away from the surface burners.
■If you smell gas, turn off the gas to the cooktop and call a qualified service technician. Never use an open flame to locate a leak.
■To avoid the possibility of a burn, always be certain that the controls for all burners are at the off position and all grates are cool before attempting to remove them.
■Never clean the cooktop surface when it is hot. Some cleaners produce noxious fumes and wet cloths could cause steam burns if used on a hot surface.
■Never leave jars or cans of fat drippings on or near your cooktop.
■Do not use aluminum foil under burner grates. Misuse could result in a fire hazard or damage to the cooktop.
■Do not cover or block the area around the cooktop knobs. This area must be kept clear for proper ventilation and burner performance.
■Clean only parts listed in this Owner’s Manual.
Operating Instructions Care and
COOK MEAT AND POULTRY THOROUGHLY…
Cook meat and poultry
CONVERTING TO LP GAS (or converting back to natural gas from LP)
This cooktop leaves the factory set for use with natural gas.
If you want to convert to LP gas, the conversion must be performed by a qualified LP gas installer.
The conversion instructions, conversion sticker and LP orifices can be found attached to the pressure regulator.
There is a second set of instructions included in the envelope containing the product wiring diagrams on the side of the cooktop. Keep these instructions and the orifices in case you want to convert back to natural gas.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
7