GE ZIR36N RH, ZIR36N LH, ZIF36N RH, ZIF36N LH Models, Available, Trim kit, Descriptions

Page 6

 

Design Information

 

 

 

 

 

 

36″ Refrigerators, Freezers

 

 

 

 

Models

ZIR36N RH, Refrigerator ZIF36N RH, Freezer

ZIR36N LH, Refrigerator ZIF36N LH, Freezer

available

36″ wide models with handle on left side, the door

36″ wide models with handle on right side, the door

 

swings left to right.

swings right to left.

 

 

 

 

Trim kit

ZGC2 – Provides 1/4″ grille panel frame side pieces

ZKHTRSS1 – Tubular stainless steel handles for 3/4″

descriptions

for 83-1/2″and 84-1/2″installation heights. The

thick panel installations. This kit must be used in

 

supplied grille panel frame is factory set for 84″.

combination with ZKTR36LH or ZKTR36RH.

 

ZKHR1 – Provides the necessary framework to install

ZKTR36LH (left opening models),

 

a custom handle, of your choice, onto a 1/4″ thick

ZKTR36RH (right opening models) – Provides for

 

panel. (Handle not included.)

the installation of 3/4″ thick custom door and grille

 

ZKHRSSI – Tubular stainless steel handle for 1/4″

panels. This kit provides a standard handle to fit 3/4″

 

thick panels.

 

thick panel installation.

 

 

 

 

ZUG75 – For side by side installation of two products.

 

ZKHTR1 – Provides the necessary framework to

This kit provides for the installation of a unified 3/4″

 

install a custom handle, of your choice, onto a 3/4″

custom grille panel to span the width of two

 

thick panel. (Handle not included.) This kit must be

products. Includes a trim strip to cover inside case

 

used in combination with ZKTR36LH or ZKTR36RH.

trim for a more finished appearance. This kit must

 

 

be used in combination with both the ZKTR36LH

 

 

and ZKTR36RH.

1/4″ Panel with standard

1/4″ Custom panel with

handles. No kits required.

custom handles. Trim Kit

 

ZKHR1.

1/4″ Custom panel with Tubular Stainless Steel handles, Trim Kit ZKHRSS1.

3/4″ Custom panels with supplied handle. Trim Kit ZKTR36LH (or ZKTR36RH).

3/4″ Custom panel with custom handle. Trim kits ZKTR36LH (or ZKTR36RH) and ZKHTR1.

3/4″ Custom panel with Tubular Stainless Steel handle, Trim Kits ZKTR36LH (or ZKTR36RH) and ZKHTRSSI.

Side by side installation with 3/4″ custom panels and unified custom grille panel. Trim Kits ZUG75, ZKTR36LH, ZKTR36RH.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation Instructions Contents INGDesign Information 36″ Refrigerators, FreezersWhen Installed into a corner Side By Side Installation Freezer RefrigeratorAdvance planning exterior appearance options Installation Between Base Wall CabinetsInstallation At End-of-Run ″ thick custom panels-Without trim kitsTrim kit ModelsAvailable DescriptionsCustom Panel Dimensions Clearances″ Panel Cut panels to size 35-1/16 Handles35 -1/16 Custom Door Panel DimensionsDimension a Unified Custom Grille Panel 71-3/8 Thick PanelCustom Door Panel Dimensions Using Standard Trim ″ Side Panels Insert end Trim23 5/16 Flooring InstallationMaterials Required Grounding the RefrigeratorStep Remove Packaging Water Line InstallStep Shut off the main water supplyIllustration B Step Install Side PanelsIllustration a ″ to 3/4″ Side Panels Leading edge of sideStep Secure LevelOr Freezer To SidesDoor panels Install 1/4″Power Step CheckAlignment Adjust DoorTemperature Controls Arrange InteriorTo change grille panel size Grille Panel Frame AdjustmentZGC2 Trim Kit PiecesSupport for Custom Handles Parts ListZKHR1 Trim Kit For 1/4 ″ Panels Tools and materials requiredZKHR1 Trim Kit For 1/4″ Panels Door using at least 2 screwsReinstall original screws into the door extrusion Locate handle positionZKTR36LH/ZKTR36RH Trim Kit ″ Custom PanelsInstall panels Back Side Custom PanelGrille Install Handles StepAdjust Panel heightInstall four of the six larger undercut screws so that Top of the screws are 1/16″ from the surfaceGrille panel Part List ZKHTR1 Trim Kit For 3/4″ PanelsTools and materials required BeforePosition Temporarily mount door panelLocate AssembleMount assembled panel ZKHRSS1 Trim Kit For 1/4″ Panels Tubular Stainless Steel HandlesOn the back side of the panel-at the handle side If you are installing handle onto a Stainless Steel PanelStep Match handle extrusions to handle Measure and mark 1/4″ below the top edgeStep Install standoffs onto handles Step Install handles and panelsDecorator Raised Panel on 1/4″ Thick Backing Before you ZKHTRSS1 For 3/4″ PanelsKit BeginTo Panel Using the Allen wrench provided. The standoffMatch Handle Should be tight against the handleStep Install Spacer Pads ZUG75 Trim KitUnified 3/4″ Custom Grille Panel Kit Roll Both Products into Opening Refrigerator and freezer must be secured to prevent tippingStep Level Both Products Install Center Step Remove Wire Fence and Switch CoverTrim Strip Step Install Grille Base Cover Remove Grille Frame Unified Base CoverStep Install Soffit Vent Top Secure Custom Panel To Support Removing side screws. Discard top piece, retainStep Adjust Door Alignment
Top Page Image Contents