GE ZIR36N LH, ZIF36N RH, ZIR36N RH, ZIF36N LH ″ Panel Cut panels to size, 35-1/16 Handles

CUSTOM PANEL DIMENSIONS

Custom Panel Dimensions

	36″ Refrigerators, Freezers
Custom Door Panel Dimensions Using Standard Trim	ZIR36N Refrigerator
1/4″ thick panels	ZIF36N Freezer
or	•1/4″ Panel: Cut panels to size.
Panels secured to 1/4″ thick backing	•Custom handle with 1/4″ door panel requires Trim
	kits ZKHR1 or ZKHRSS1 for tubular stainless steel
35-1/16"	handles.

1/4" Thick

Custom Panel

Standard Trim with Panels secured to 1/4″ thick backing

•Applying a raised panel design to a 1/4″ thick

	backing (screws or glued): Cut 1/4″ thick panels to
	size. Fabricate the raised panel to permit at least 2″
	fingertip clearance of the standard handle. 1-1/4″
	clearance from the hinge side to avoid striking
68-7/8"	adjacent cabinetry and 5/16″ from the top and
	bottom edges to allow for the trim flange.
	NOTE: ZKHTR1 custom handle kit cannot be used in
	this configuration.
		Custom Grille Panel
		35 1/8"
	8"	1/4" Thick Panel

IMPORTANT: Maximum total weight for assembled door panel is 67 lbs., maximum grille panel weight is 9 lbs.

Raised Panel on 1/4" Thick Backing

Using Standard Handles

The grille panel frame is factory assembled for 84″ installation height. If installation height varies, order ZGC2 trim kit that provides optional side trim pieces. Cut grille panel to sizes shown below.

Installation Height	Panel Height
83-1/2″	7-1/2″
84-1/2″	8-1/2″

1/4"

Thick

Backing

Appearance Panel

2" Clearance handle Side

5/16" Clearance

Raised Panel

on 1/4" Thick

Backing With

Standard

Handles

5/16" Clearance

5/16" Clearance

1-1/4" Clearance hinge side

8