| ZKHR1 Trim Kit (For 1/4″ Panels) | |
|
|
|
| Support for Custom Handles | |
|
|
|
Tools and materials required: | Right hand door swing models are illustrated in these | |
• #2 Phillips screwdriver | instructions. Follow these instructions for left hand | |
• Drill and appropriate bits | models. | |
• Custom door panel |
|
|
• Custom Handle |
|
|
• Safety glasses |
|
|
Parts List:
A. Handle side door extrusion (for left hand models)
B. Handle side door extrusion (for right hand models)
This kit provides the necessary framework to install a custom handle, of your choice, onto a 1/4″ thick custom panel. (Handles not included.) The extrusions in this kit allow the custom handle to be secured to the door structure, rather than the door panel.
•Select the extrusion for your model, discard other extrusion.
Step 1 | • Open door to 90°. Remove the screws from the full |
Remove | length aluminum handle. |
handle | • Retain screws. Discard handle. |
20