Aiwa Z-R555 manual Press Prgm while pressing Shift in stop mode

“When Ioadina an 8-cm (3-inch) disc, make sure to ~lace it onto the inner circle of the trav p reciselv. Otherwise, the disc may be damaged or the disc compartment will not open. If it does not open, please consult your Aiwa dealer for repair.

●Do not place more than one compact disc on one disc tray.

●Do not tilt the unit with discs loaded, Doing so may cause malfunctions.

●When transporting the unit, remove the discs from the trays.

●When replacing the discs during play, do not replace discs other than those facing you.

If you place a disc on the empty right inner tray, and then press

A OPEN/CLOSE, “ERROR” is displayed and the disc compartment may not close. Remove the disc on that tray.

Up to 30 tracks can be programmed from any of the inserted

discs.

-

2

1

3

1u,>

■uQ ,5 -—.

Use the remote control.

1 Press PRGM while pressing SHIFT in stop mode.

“PRG” is displayed

Use the remote control.

RANDOM play

All the tracks on the selected disc or all the discs can be played randomly.

REPEAT play

A single disc or all the discs can be played repeatedly.

Press RANDOM/REPEAT while pressing SHIFT .

2 Press one of DISC DIRECT PLAY 1-5 to select a disc.

To select disc 4 or 5, press DISC DIRECT PLAY 4 or 5 while pressing SHIFT.

Go to the next step when the tray stops rotating.

3 Press numbered buttons O-9 and +10 to program

atrack.

Example:

To select the 25th track, press +10, +10 and 5. To select the 10th track, press +10 and 0,

Each time it is pressed, the function can be selected cyclically.

RANDOM play — RANDOM lights up on the display.

REPEAT play — ~ lights up on the display. RANDOM/REPEAT play — RANDOM and C& light up on the

display.

Cancel — RANDOM and C& disappear from the display.

To plav all discs, press E to start play.

To Wav a sincrle disc, press one of DISC DIRECT PLAY 1-5 to start play.

Selected track number

I

Program number

Total number of selected tracks

I

Total play;ng time of the selected tracks

To select disc 4 or 5 from the remote control, press DISC DIRECT PLAY 4 or 5 while pressing SHIFT.

During random play it is not possible to skip to the previously played track with <.

4 Repeat steps 2 and 3 to program other tracks. 5 Press - to start play.

To check the program

Each time < or - is pressed in stop mode, a disc number, track number, and program number will be displayed.

To clear the program

Press ■ CLEAR in stop mode.

To add tracks to the program

Repeat steps 2 and 3 in stop mode, The track will be programmed after the last track.

To change the programmed tracks

Clear the program and repeat all the steps again

To play the programmed tracks repeatedly

After programming the tracks, press RANDOM/REPEAT repeatedly while pressing SHIFT until ~ appears on the display.

m

During programmed play, you can not use random play, check

the remaining time or select a disc or track.

ENGLISH 10