Door Features

Half-Width Wire Baskets

There are two half-width wire baskets in your convertible refrigerator/ freezer.

To remove and replace a half-width basket:

1.Remove all items from basket. Remove the basket by lifting the front out of the slides, then lifting the basket out.

2.Replace the wire basket by lowering the basket into the slides then pushing the basket backward until it is under the shelf.

Full-Width Wire Basket

To remove and replace full width wire basket:

1.Remove all items from basket. Remove the basket by lifting the front out of the ball-bearing slides, then lifting the basket out.

2.Replace the wire basket by first extending the ball-bearing slides, then lowering the tabs on the sides of the wire basket into the slides. Push the basket backward until it is under the shelf.

Frozen Food Storage Guide

Storage times will vary according to the quality and type of food, the type of packaging or wrap used (should be airtight and moisture- proof), and the storage temperature. Seal the package or container securely to prevent taste and odor transfer throughout the product. Ice crystals inside a sealed package are normal.

Put no more unfrozen food into the freezer than will freeze within

24hours (no more than 2 to 3 lbs. of food per cubic foot [907-1,350 g per 28 L] of freezer space). Leave enough space in the freezer for air to circulate around packages. The freezer door must close tightly. For more information on preparing food for freezing, check a freezer guide or reliable cookbook.

Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the toll- free number on the cover or in the “Assistance or Service” section.

Door Rails

The door rails may be removed for easier cleaning.

To remove and replace the rails:

1.Remove the rails by pulling straight up on each end of the rail.

2.Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops.

Full-Width Shelf

To remove and replace the shelf:

1.Remove all items from the shelf. Remove the shelf by raising the front and pulling it forward.

2.Replace the shelf by lifting the front while sliding the shelf back until it locks into place.

Door Bins

To remove and replace the bins:

1.Remove the bin by lifting it and pulling it straight out.

2.Replace the bin by sliding it in above the desired support and pushing it down until it stops.

Wire Door Shelf

To remove and replace the wire door shelf:

1.Remove the wire door shelf by lifting it out of the door rail.

2.Replace the door shelf by sliding it into the back of the door rail and snapping it into place.