CARE AND CLEANING
c.Slowly increase Variable Speed to 10.
d.Run the machine for 30 to 60 seconds.
e. Rotate the Variable Speed dial to the Stop Symbol ( ) at the top of the dial.
•Program:
a.Rotate the Variable Speed dial to the Cleaning (
) program icon. The Cleaning (
) program will run for approximately 1 minute.
b.After the program stops, rotate the Variable Speed dial to the Stop Symbol (
) at the top of the dial.
5.Allow mixture to stand in the container for an additional 1 ½ minutes.
6.Pour bleach mixture out. Allow container to air dry.
7.Do not rinse after sanitizing.
WARNING
Electrical Shock Hazard.
Disconnect power before cleaning machine.
Failure to follow instructions can cause death or electrical shock.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash parts in warm, soapy water. Rinse clean under running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the container, lid, lid plug or tamper in the dishwasher.
Motor Base
1.Unplug the power cord.
2.Wash the outside surface with a damp, soft cloth or sponge that has been rinsed in a mild solution of liquid detergent and warm water. Do not place the motor base in water.
3.The centering pad can be removed for more thorough cleaning.
4.Thoroughly clean the switches so they work freely. They may become sticky from use. Moisten a cotton swab with a household degreaser or cleaner and clean the grooves around the switches. Immediately dry all surfaces.
5.Polish with a soft cloth.
18