Kenmore 318205869A manual To Set the Timed Bake and Delay Start Features

Page 16

Setting Oven Controls

To Set the Timed Bake and Delay Start Features

The COOK TIME and DELAY START pads operate the features that will turn the oven ON and OFF at the times you select in advance. Theoven can be programmed to start immediately and shut off automatically (Timed Bake) or to begin baking at a later time with a delayed start time (Delay Start).

Note: During Timed Bake the preheat indicator light will not function.

To Program the Oven to Begin Baking Immediately and To Shut Off Automatically (Timed Bake):

1.Be sure that the clock shows the correct time of day.

2.Place the food in the oven.

3.Press . " — — — ° " appears in the display.

4.Within 5 seconds, press the or . The display will show "350°F (177°C)”. By holding the or , the temperature can then be adjusted in 5°F increments (1°C ).

5.Press . "0:00" will flash in the display (HR:MIN).

6.Press the or until the desired baking time appears in the display.

7.The oven will turn ON and begin heating.

To Program Oven for a Delayed Start Time and to Shut-Off Automatically (Delayed Start Bake):

1.Be sure that the clock shows the correct time of day.

2.Place the food in the oven.

3.Press . " — — — ° " appears in the display.

4.Within 5 seconds, press the or . The display will show "350°F (177°C)."By holding the or , the temperature can then be adjusted in 5°F increments (1°C).

5.Press . "0:00" will flash in the display (HR:MIN).

6.Press the or until the desired baking time appears.

7.Press . The earliest possible start time will appear in the display.

8.Press the or until the desired start time appears in the display.

9.Once the controls are set, the control calculates the time when baking will stop in order to start at the time you have set.

10.The oven will turn ON at the delayed start time and begin heating.

When the Set Bake Time Runs Out:

1."END" will appear in the display window and the oven will shut-off automatically.

2.The control will beep 3 times every 60 seconds until is pressed.

To Change the Oven Temperature or Bake Time after Baking has Started:

1.Press the function pad you want to change.

2.Press the or to adjust the setting.

Use caution with the Timed Bake and Delayed Start features. Foods that can easily spoil such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be removed promptly when cooking is completed.

16

Image 16
Contents Kenmore Table of Contents Important Safety Instructions Where appliance is in use. They should never While using the appliance. Do not let clothingWhen heating fat or grease, watch it closely Do not leave children alone-Children shouldSave These Safety Instructions Grounding Instructions Conversion to Liquefied Petroleum Gas or L.P. GasSlide-in Range Features Your Slide-in Range Features At a GlanceBefore Setting Surface Controls Control Locations of the Gas Surface BurnersSetting Surface Controls Setting Proper Surface Burner Flame SizeOperating the Gas Surface Controls Flame Size Type of CooktopSurface Cooking Using a wokUse Proper Cookware Before Setting Oven Controls Oven Vent LocationRemoving and Replacing Oven Racks Arranging Oven RacksSetting Oven Controls Control Pad FunctionsTo Set the Minute Timer Temperature conversionTo Change the Minute Timer while it is in use To Set the ClockTo Set Control for Continuous Bake or 12 Hour Energy Saving To Set or Change the Temperature for BakingTo Set Control for Oven Lockout Cooking Information Oven BakingTo Set the Timed Bake and Delay Start Features When the Set Bake Time Runs OutSetting Oven Controls cont’d To Set for Broiling Broil Rack Position Table Refer to Fig Food categorySetting the Warm & Hold Feature To Operate the Oven LightTo set Warm & Hold To set Warm & Hold to turn on automaticallySelf-Cleaning Oven CleaningAdjusting the Oven Temperature Self-Clean Time LengthTo Adjust Oven Temperature General Care & Cleaning Cleaning Various Parts of Your RangeCleaning the Cooktop, Burner Heads, Caps & Grates General Care & Cleaning cont’d3rd Removing and Replacing the Lift-Off Oven Door Door Hinge locations With oven door fully openTo Remove Oven Door To Replace Oven DoorChanging Oven Light Storage DrawerSolutions to Common Problems Appliance must be accessible forService Code error for exemple F11Self-cleaning cycle does not work Cleaning cyclePoor baking results Fan noise during cooking operationProtection Agreements Get it fixed, at your home or ours Cuisinière encastrable Emplacementdelaplaque de série Table des matièresGarantie sur appareil Kenmore Enregistrement de l’appareilEntretien par l’usager-Ne réparez pas ou ne Le faites, un empoisonnement au monoxyde deCarbone pourrait en résulter et l’appareil pourrait Ne modifiez jamais l’appareil, que ce soit enMesures de sécurité importantes Fours autonettoyants Ne laissez jamais les brûleurs sans surveillanceInstructions de mise à la terre Conversion au gaz propaneCaractéristiques de l’appareil Four autonettoyantAvant de régler les commandes des brûleurs de surface Emplacement des commandes des brûleurs de surfaceRéglage des commandes des brûleurs de surface Réglage de la bonne dimension de la flammeEmploi des brûleurs de surface Type de cuissonUstensiles pour la cuisson sur les brûleurs Cuisson sur la table de cuissonUtilisation d’UN wok Avant de régler les commandes du four suite Installation des grillesPosition de l’évent Enlever et replacer les grilles de fourRéglage de la commande du four Fonctions des touches de la commande du fourPour un tableau de commande silencieux Réglage de lhorlogeRéglage de la minuterie Conversion de la températureRéglage de la fonction de verrouillage du four Pour régler la commande du four pour la cuisson au fourPour régler la fonction de verrouillage Cuisson au four Lorsque la durée de cuisson programmée s’est écoulée Cuisson au gril Catégorie d’alimentFonctionnement de la lampe du four Réglage de la fonction Garder ChaudMDRéglage de la fonction Garder ChaudMD Cycle autonettoyant Nettoyage du fourPrenez les précautions de nettoyage qui suivent Préparation du four avant le cycle autonettoyantDurée du cycle autonettoyant Ajustement de la température du fourLa fin du cycle autonettoyant Arrêt ou interruption d’un cycle autonettoyantEntretien général & nettoyage Entretien général & nettoyage suite 1erNettoyage de l’acier inoxydable Enlever et replacer la porte du fourPour enlever la porte du four Pour replacer la porte du fourRemplacement de l’ampoule du four Tiroir de rangementSolutions aux problèmes les plus fréquents Facilement. Il doit être accessibleLa commande du four sonne et ’appareil n’est pas de niveauLa flamme est orange Le four dégage beaucoup de fuméeDurant la cuisson au gril Tion Réglage du four AutonettoyantContrats DE Protection Get it fixed, at your home or ours