SET-UP AND ASSEMBLY
Pre-Delivery Check List
(Dealer Responsibility)
1.Inspect the mower thoroughly after assembly to ensure it is set up properly before delivering it to the customer. The following check lists are a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.
2.Check a l l bolts to be sure they are correctly torqued.
3, Check that all linchpins. . are properly installed.
4.Lubricateall grease fittings; check to make sure a small amount of grease comes out of seal.
5.Check that gearbox is serviced and that vent plug is properly installed and seals are not leak- ing.
6.Check that blades have been properly installed.
Delivery Check List
(Dealer Responsibility)
1.Check mower attitude and belt alignment.
2.Check that mower lift is properly adjusted. (See Assembly instructions.)
3.Show customer how to make adjustments.
4.Explain importance of lubricationto customer and point out lubrication points on mower.
5.Point out safety features, shielding and options.
6.Present the Operator's Manual, and ask cus- tomer to become familiar with all sections.
7.Explainto customer that when mower is trans- ported on a road or highway, safety devices should be used for adequate warning to operators of other vehicles.