Alamo JD-5425, JD-5525, JD-5225, JD-5205, JD-5105, JD-5325 manual Typical

Pump & Drive Shaft Installation:

20.Pump Hose Connections. The pump hose connections should not be connected until later so they will not be in the way. Leave all fittings on pump covered and sealed (See Figure 26), the fittings are left covered and sealed to prevent them from getting contamination into hydraulic system. The hose will be connected to pump in a later step. The Fittings should be installed onto the pump as

shown and in sequence as shown (See Figure 26).

				7/8" x 13
	Pump Fittings (Figure 26)			Spline End
Item	Part No.	Qty	Description
1.	02975187	1	Adapter, Elbow 12MB-8ML45	3/4" w/ 3/16"
2.	02968850	1	Adapter, Straight 8MB-6MJ
				Keyway End
3.	02975186	1	Adapter, Straight 16MB-12FP
4.	0022400	1	Adapter, Elbow 12MP-12FP90
5.	000849	1	Adapter, Elbow, 12MP-12FP45	Typical
6	0222100	1	Hose Bib, #16 Hose - 12MP	Drive Shaft

Figure 23

						P/N 02975188
						Flex Coupler Asy.
		Figure 23A			Figure 24
						6
					Motor Pressure	5
					Port
				1		4
				2		Suction
					Cyl - Valve	Port
					Pressure Port	3
		Figure 25			Figure 26
Switch Blade (JD-5105-5205-5225-5325-5425-5525, Asy. Man) 05/05
	© 2005 Alamo Group Inc.		Section 3 - 11