Alamo JD-5525, JD-5425, JD-5225, JD-5205, JD-5105 Index Assembly Instruction, Model Specifications

INDEX - ASSEMBLY INSTRUCTION

Introduction	Page
Manual Introduction	Index-1
Section 1 - Model Specifications
DO NOT DO LIST (IMPORTANT)	1-2
Specifications	1-3 to 1-4
Using Torque Wrench with Adapters (Formula)	1-5
Hose Fitting Torque Chart	1-6
Bolt Torque Chart	1-6
Section 2 - Tractor Preparation
General Information	2-2 to 2-6
Section 3 - Pump & Driveshaft Installation
Pump & Driveshaft Schematic	3-2
Remove Engine Guards for Access to engine compartment	3-3
Remove Battery	3-3
Remove & Modify Tractor Bolster Plate	3-3 to 3-5
Pulley Adapter Installation	3-5
Modify Tractor Bolster (Cut Driveshaft Hole)	3-6
Reinstall Tractor Bolster Plate	3-7
Reinstall Battery	3-7
Reinstall Engine Side Shields	3-7
Install Driveshaft	3-8
Install Pump Mount	3-8
Install Drive Shaft Flex Coupler Assembly	3-8
Install Pump	3-9
Section 4 - Frame Installation
Frame & Sub-frame Mounting Bolts ID	4-2
Remove Tractor RH Steps	4-3
Remove RH Three Point Stabilizer Bracket	4-3
Install Frame Rail	4-3
Reinstall Tractor RH 3 Point Stabilizer Bracket	4-3
Install Sub-Frame Weldment	4-3
Install Carriage Arm / Cutter Head Assembly	4-4
Install Hydraulic Tank Assembly	4-4
Install Operators Manual Cannister	4-5

Switch Blade (JD-5105-5205-5225-5325-5425-5525, Asy. Man) 05/05

© 2005 Alamo Group Inc. Index -2