Alamo JD-5105, JD-5525 Mount Kit Component Identification, Mount Kit Rops Flat Ioos Platform Only

Mount Kit Component Identification

John Deere

5425/5525 CAB & ROPS/2&4wd w/Flat Platform

As Of: 03-25-05

Front Tires:

11.2-24 (R-1) Max front tire

Rear Tires:

16.9-30 (R-1) Max rear tire

Mount Kit: ROPS Flat (IOOS) Platform Only

Subframe Kit ………………………………………………….....02982523

Hydraulic Kit ………………………………………………......... 02982524

Mount Kit: Cab Only

Sub-frame Kit ……………………………………..................... 02982523

Hydraulic Kit …………………………………………………......02983229

Important Note:

1.The ROPS mount kit has been designed to fit tractors equipped with an “isolated open operator station (IOOS)” (ie: flat platform). The dealer/customer is responsible for any required modi- fications for mounting tractors equipped with a “straddle mount operator station” instead.

2.The right hand step must be removed for lift carriage clearance. Ingress/egress on the right is otherwise blocked by the control stand.

3.If the tractor is equipped with a mid-mount valve, it may also need to be moved for clearance reasons. Mid - Mount Valve Is a Tractor Mounted Option where aux vlave is mounted on the RH side of tractor behind RH step. Cab models should clear butmodification may be required by installer at customer or dealer exspense.

4.First cut from tractor center line for a right hand cutterbar is 54".

Flat Operators

Platform

The right hand step has been removed

(1)isolated open operator station (flat platform). (2) The right hand step must be removed . Switchblade (JD-5105-5205-5225-5325-5425-5525 Asy. Man.)05/05

© 2005 Alamo Group Inc. Section 8 - 2