Installing and Operating the Module 3 -3
Unpacking Procedures
When unpacking your 10BASE-FB Module:
1. Verify that the 10BASE-FB Module is the c orrect model by matching
the model number listed on the side of the shipping ca rton to the
model number you ordered (Mode l Numbers 5102M-FBP, 5104M-FBP,
or 5104M-FB1).
Note that the product model number printed o n the shipping box
differs from the model number on the product. T he model number
on the shipping box contains the prefix ’3C9’.
2. Remove the module from the shipping c arton.
3. Remove the module from the anti-static shielding b ag and inspect it
for damage. If the module appears to be damaged, replace it in the
anti-static shielding bag, return it to the s hipping carton, and contact
your local supplier.
4. Keep the shipping carton a nd anti-static shielding bag in which you r
module was shipped for repackaging the module for storage or
shipment.
5. Record the serial number of your 10BASE-FB Mo dule. A log for this
and other information specific to your modules is included in the
ONline SystemConcentrator Installation an d Operation Guide,
Appendix B, Slot Usage Chart.