3Com FlexWATCH 3110 user manual LAN cable or Cross-Over Cable, Dhcp Enabled PC

Network Video Server User’s Manual

Reply from 192.168.0.155: bytes=32 time=10ms TTL=128

Reply from 192.168.0.155: bytes=32 time<10ms TTL=128

Reply from 192.168.0.155: bytes=32 time<10ms TTL=128

Reply from 192.168.0.155: bytes=32 time<10ms TTL=128

2.1.2DHCP Enabled PC

If your PC is set to use DHCP, you need to check out IP address of your PC using ‘ ipconfig’ command at DOS Prompt window.

You need to get IP address from your network administrator to assign it to FlexWATCHTM server. IP address should be Surplus of IP address which will be not randomly assigned to any network device in your network.

Your network administrator must make sure that IP address should be excluded from IP pool when he configure Router.

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : 3Com EtherLink III

ISA (3C509/3C509) in Legacy mode

Physical Address. . . . . . . . . : 00-60-08-3C-40-90

DHCP Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 192.168.0.158

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.0.1

DHCP Server . . . . . . . . . . . : 192.168.0.1

DNS Servers . . . . . . . . . . . : 168.126.63.1 168.126.63.2

C:\>

2.2LAN cable or Cross-Over Cable

Check out whether FlexWATCHTM server can be connected through LAN cable or Cross--

23 Seyeon Tech Co., Ltd

- INTPLUS [2005] -