Network Video Server | User’s Manual |
only.
This function is not for general use. Thus, if you need more close information about this, please contact your local distributor or manufacturer for further information, sales@flexwatch.com.
2.3Serial output device
The system supports to relay third party command to target device through Serial output device control mode. Through this, user defined message can be reached to target device
The system supports two different modes. One is X10 protocol for PLC (Power Line Communication) and UART(Universal Asynchronous Receiver Transmitter) device.
2.3.1Serial Output Configuration
Following is guide for hardware cabling and setting.
1)Connect your Serial Output Device to RS422/485 Port or RS232 (COM or AUX) port.
2)Go to Admin Menu >> System Configuration >> Serial Ports Configuration.
3)Select ‘Serial Output’ at COM or AUX mode, and Click ‘Apply’ button.
4)System reboot will be recommended, then click ‘Reboot’ button.
5)After rebooting, Go to Admin Menu >> System Configuration >> Serial Ports Configuration.
6)Click “Serial Output Mode”, then following window will show up.
68 | Seyeon Tech Co., Ltd |
|
- INTPLUS [2005] -
