Network Video Server

 

User’s Manual

 

Stop bits

1

 

 

Flow control

None

 

6)After setting Hyper Terminal, press Enter key several times and then you can see messages as below. Input Login ID and Password. (Factory defaults for Admin ID and Password are root/root.)

Seyeon Tech Co., Ltd. 2001-2003

Linux Kernel 2.4.20-syl1

FlexWATCH login:

7)If you correctly input Login ID and Password, ‘bash#’ prompt will show up as below.

FlexWATCH login: root

Password:

-----------------------------------------------------------

SYSTEM : FlexWATCH

VERSION : 3.0.040130

MODEL : FW-3110

-----------------------------------------------------------

login[504]: root login on `ttyS0'

bash#

8)Input ‘netconfig’ command after ‘bash# ’ prompt, and press Enter key. Then you can see following network setup values.

bash# netconfig

--------------------- Network(LAN) Setup ---------------------

Current configuation

IP Address : 10.20.30.40

Network Mask : 255.255.255.0

Gateway : 10.10.1.1

Enter IP Address :

9)Input new IP address, Network Mask and Gateway values to be assigned to FlexWATCHTM server. After this, press “y” to apply the new network configuration.

30

Seyeon Tech Co., Ltd

 

- INTPLUS [2005] -

Page 30
Image 30
3Com FlexWATCH 3110 user manual Stop bits Flow control