3Com FlexWATCH 3110 user manual PTZ device connection and configuration, PTZ connection

+ - + - + - + -

TX TX RX RX TX TX RX RX

AUX

Network Video Server User’s Manual

A. By-pass command string from third party

This is to send command string from third party application program to the target device connected to the server. More about this function can be supplied by HTTP CGI API guide.

B. Control panel inside of the system

You can create control panel of external device inside of the server and control target device through server web page.

This function is not for general use. Thus, if you need more information about this, please contact your local distributor or manufacturer for further information, sales@flexwatch.com.

2.4PTZ device connection and configuration

PTZ(Pan/Tilt/Zoom) device connected to the server can be controlled through either standard web browser or specific application program over IP network.

2.4.1PTZ connection

When you install a RS-485/422 interfaced PTZ model:

PTZ device has to be connected to RS422/485 Port with RJ-45 connector. And it can be configured either in AUX or COM part. As mentioned above

please check whether AUX or COM port for RS-232 is already	AUX COM
assigned or not and use different part for RS-422/RS-485
connection which is not assigned by RS-232 Port.	1 2 3 4 5 6 7 8

When you select PTZ at AUX part,

make use of Pin No. 1 and 2 from RS422/485 port. When you select PTZ at COM part,

make use of Pin No. 5 and 6 from RS422/485 port.

When you install a RS-232 interfaced PTZ model:

PTZ device has to be connected to AUX or COM Port with RS-232 Serial Cable. Standard RS-232 cable can be used to connect AUX or COM port.

1)Connect your PTZ device into RS232 (COM or AUX) port as above explanation.

70 Seyeon Tech Co., Ltd

- INTPLUS [2005] -