3Com FlexWATCH 3110 user manual Tx Module RegistrationNVCP

Network Video Server User’s Manual

6 Tx Module Registration(NVCP)

)Notice

-If you do not connect FlexWATCHTM server to NDVR server, do not set TX module configuration

-Once Tx Module configuration is done, set up RX module configuration in the NDVR server as well

Video proxy function is supported by NDVR server such as FW-5440 and FW-5000 server. By registering FlexWATCHTM video server into NDVR server, live video can be recorded in the NDVR server and live view can be accessed through NDVR server web page which means user does not need to separately run web browser to view respective cameras from FlexWATCHTM video servers.

TX module registration is to set up the FlexWATCHTM server to communicate with FW- 5440 or FW-5000 NDVR server or FW-VSS Proxy Server only. When TX module is enabled at the FlexWATCHTM server, RX module at NDVR server side should also be enabled as well.

Two different modes are provided as a connection type. One is Passive and the other is Active mode. Depending on which device tries to establish the connection to the other party, the connection type will be decided.

Passive mode : NDVR server tries to establish connection to FlexWATCHTM server

Active Mode : FlexWATCHTM server tries to establish connection to NDVR server Once connection type is decided in the FlexWATCHTM server, the connection type in the NDVR server should be opposite so that it can communicate with FlexWATCHTM server.

For example, once Passive mode is set up in the FlexWATCHTM server, Active mode must be set in the NDVR server.

48 Seyeon Tech Co., Ltd

- INTPLUS [2005] -