Network Video Server

User’s Manual

 

 

 

 

 

 

IP Address

Input an IP address to be assigned to

 

 

 

FlexWATCHTM server

 

 

 

Note that the IP must be directly connectable

 

 

 

with user’s PC. The above IP ’10.10.225.100’ is

 

 

 

only an example.

 

C

IP, Subnet, Gateway

Whether to change IP, Subnet and Gate or IP and

 

 

 

Subnet mask only.

 

D

Set IP Address’ Button

To activate a new IP assignment, click this

 

 

 

button.

 

E

Save IP Address’ Button

To save IP-Address in the Flash Memory.

 

 

 

 

 

F

Go to Home Page’ Button

To launch FlexWATCH Web browser and start

 

 

 

other configuration through Administration page.

 

G

‘Telnet to System’ Button

To guide you Telnet mode for Advanced

 

 

 

Configuration.

 

H

Result window

Show the result of IP assignment. If failed, try

 

 

 

again from the start or use other configuration

 

 

 

method

3)

Input the Serial No. (MAC address) and Select “LAN Port”.

 

 

 

 

4)

Input the IP address, which will be assigned to the system.

 

 

 

5)

Click “Set IP Address” button to save the above configuration.

 

 

6)

Check whether message type is correctly appeared on Result window as below.

 

 

 

 

 

 

 

 

 

------------ Set Server IP Address ------------

 

 

 

 

 

 

ARP: Adding static entry to ARP table

[

OK

]

 

 

 

Ping: Trying ping 10.10.225.100

[

OK

]

 

 

 

ARP: Deleting static entry from ARP table

[

OK

]

 

 

 

 

 

7)

If message come up as below, IP address setting has been failed.

 

 

 

 

 

 

 

 

 

------------ Set Server IP Address ------------

 

 

 

 

 

 

ARP: Adding static entry to ARP table

[

OK

]

 

 

 

Ping: Trying ping 10.10.225.100

[FAILED]

 

 

 

Please check whether IP address and MAC address is

 

 

 

valid.

 

 

 

 

 

 

Then, please retry again.

 

 

 

 

 

 

ARP: Deleting static entry from ARP table

[

OK

]

 

-If IP address setting is failed, please check whether correct IP/MAC address is entered. And try again with correct IP/MAC address, or please use HyperTerminal method.

-If the above result is O.K., follow the next step to finish Network Configuration.

27

Seyeon Tech Co., Ltd

 

- INTPLUS [2005] -

Page 27
Image 27
3Com FlexWATCH 3110 user manual ‘Save IP Address’ Button, ‘Go to Home Page’ Button