3Com FlexWATCH 3110 2 X 10 device & Z256, UARTUniversal Asynchronous Receiver Transmitter device

Network Video Server User’s Manual

G. After setting up the parameters in the each filed, click ‘Apply’ button. Note that if

you are using X10 device protocol, you do not need to set up parameters, but simple select X10 “Enable” option.

2.3.2X 10 device & Z256

X10 and Z256 is a protocol name of Device which is to control electronic devices over the Power line communications. Using this control mode, you can build up a system to control any electronic device over the TCP/IP network through FlexWATCHTM server This function is highly recommended for Home automation or remote device control application.

This function is not for general use. Thus, if you need more se information about this, please contact your local distributor or manufacturer for further information, sales@flexwatch.com.

2.3.3UART(Universal Asynchronous Receiver Transmitter) device

By-pass command mode is supported by the system so that user can send command string to target device through the server from the remote area.

By-pass command string can be sent either by third party application program or control panel inside of the system.

69 Seyeon Tech Co., Ltd

- INTPLUS [2005] -