Network Video Server | User’s Manual |
1)Go to Date & Time setup menu in the System configuration section of Admin mode
2)Set the correct time and click “Apply” button
2.2Date & Time using NTP server
If multiple servers are installed over the network and controlled by client program and synchronized time info is required, use NTP(Network Time Protocol) option.
1)Go to [NTP setup] menu in the Network configuration section of Admin Mode
2)Type in NTP server name or use default NTP timeserver, ntp.ewha.net, if you do not know any NTP timeserver available in your area.
)Note
NTP timeserver provides exact time wherever it is located.
3)Enable the service and select Time Zone where the FlexWATCHTM server is located (not user’s viewing pc area)
4)Type in NTP timeserver info.
3 Admin Password Setup
System administration Menu is user definable. It is highly recommended to change default Admin Password to prevent any unwanted server control by any other person.
)Please note followings
A.Factory default admin ID is root and Password is root (Case sensitive)
B.Admin ID(root) is not user definable and unchanging
A. Only Admin Password is user definable
4 Access Control and User registration
Access permission is to set up user account for the system access. Through this configuration you can create multiple user account with different control authority for each camera and edit or delete user account.
Following features are provided by this mode
44 | Seyeon Tech Co., Ltd |
|
- INTPLUS [2005] -
