Network Video Server | User’s Manual |
5)System reboot will be recommended, then click ‘Reboot’ button.
6)After rebooting, Go to Admin Menu >> System Configuration >> Serial Ports Configuration
7)Click “Voice Mode”, then following window will show up
UDP Port :
Voice kit use UDP port to transmit Voice kit. If voice communication should be done through WAN network, please make sure UDP port is not blocked to Internet
connection in router or firewall etc.
The default VDCP (Voice Device Control Protocol) port is 32001, please go to Network port configuration mode to change VDCP port if required.
Application Idea
By changing VDCP port, you can install multiple Voice kit and FlexWATCHTM server behind the single broadband network.
Single/Multi User:
Once Multiple users are selected, only Admin account user can enjoy full duplex Audio and User account user can listen only.
Ringing :
This is to enable or disable sounds from the internal speaker of voice kit when there is a connection to Voice kit from outside.
74 | Seyeon Tech Co., Ltd |
|
- INTPLUS [2005] -
