3Com FlexWATCH 3110 user manual Service Path, Local IP address, Remote IP address

Network Video Server User’s Manual

of the FlexWATCHTM server.

Local IP address and Remote IP address is virtual IP address which is used at the time of Modem connection only

Local IP address :

System default IP address (192.168.2.1) resides in the FlexWATCHTM server for modem connection only. So when you connect the FlexWATCHTM server from remote PC using dial-up networking and physical connection is made, you need to run your web browser and enter this system default IP address(192.168.2.1) to view live video. You can change this system default IP address as well. But it is recommended not to change system default IP address for modem connection to prevent any possible error.

Remote IP address :

IP address which is automatically given to remote client PC by FlexWATCHTM server when FlexWATCHTM server is connected by remote client PC using dial-up networking. This IP address (192.168.2.2) is for data communication between FlexWATCHTM server and Remote client PC. So you do not need to change this IP address. But if you change default IP address of FlexWATCHTM server (192.168.2.1) for modem connection to different class of IP address, you need to change remote IP address to the same class of IP to match the IP class.

)Note that when Local IP address is change, remote IP address should be changed into the same class of the IP address.

5 Service Path

This is to specify service path through which server can send any information to target device.

1)Go to Service path menu in the service configuration mode

2)Select “Modem”, if any data should be sent through PSTN or external modem device and click “Apply” button.

59 Seyeon Tech Co., Ltd

- INTPLUS [2005] -