2

INSTALLING THE

NETWORK DRIVER

This chapter describes how to install the network driver that allows the 3C900B NIC to transmit and receive data over an Ethernet network.

To obtain the latest shipping version of a network driver, go to the 3Com World Wide Web site:

http://www.3com.com/

Before attempting to install a network driver, ask your network administrator which driver to install.

Go to the appropriate section in this chapter for the procedure describing how to install the driver for the network used at your site.

Windows 95

This section describes how to install the 32-bit protected-mode driver in a PC running Microsoft Windows 95. This driver can be used in both Microsoft and NetWare environments, and it supports dRMON and PACE™ technology.

Do not use the AutoLink software to install the network driver under Windows 95. To install the network driver under Windows 95, you need the Windows 95 installation files. These files may be on a CD or standard diskettes, or they may have been copied to your hard disk when Windows 95 was installed on your system.

The version of Windows 95 installed on your PC determines which of the following driver installation procedures to use.

Page 19
Image 19
3Com XLPCI manual Network Driver, Windows