Novell NetWare Server Driver |
For example, if the server uses Ethernet_802.2, the workstation must also use Ethernet_802.2.
The values <net1> and <net2> are unique numbers assigned by the network administrator to each NIC. Make sure that <net1> and <net2> are different numbers.
See the appropriate Novell NetWare manuals for further information.
Follow these steps to verify the PCI slot number that the NIC is installed in:
1Reboot to a DOS prompt.
2Insert EtherDisk diskette 1 in drive A, change to the A:\> prompt, and enter:
3c90xcfg.exe
The Selected NIC screen of the Configuration and Diagnostic Program is displayed, as shown in Figure
Figure 2-1 Selected NIC Screen of the Configuration and Diagnostic Program
3Check the slot number in the Selected NIC panel on the screen.
The slot value that appears in the Selected NIC panel must match the slot value entered in the load line of the AUTOEXEC.NCF file.
