Running Diagnostic Programs

3-5

Follow these steps to run the Echo test:

1On both PCs:

a Click the Windows Start menu. b Select Programs.

c Select 3Com NIC Utilities. d Click 3nicdiag.

e Click the Diagnostics tab to display the Diagnostics screen, shown in Figure 3-2.

2On the responding PC:

aClick Respond on the Diagnostics screen (Figure 3-2).

The Echo Test Responder screen is displayed, as shown in Figure 3-3.

Figure 3-3Echo Test Responder Screen

bClick Start on the Echo Test Responder screen.

3 On the sending PC:

aClick Send on the Diagnostics screen (Figure 3-2).

The Echo Test Sender screen appears on the sending PC, as shown in Figure 3-4.

Page 37
Image 37
3Com XLPCI manual On both PCs, On the responding PC, On the sending PC