2-8 CHAPTER 2: INSTALLING THE NETWORK DRIVER
8 Click OK.
The 3Com NIC Diagnostics window appears, confirming
successful driver installation.
9 Click Close.
The Network window appears, displaying the name of the
installed NIC.
10 Click Close.
If you are prompted for network information, enter the
information supplied by your MIS department.
Windows prompts you to restart your computer.
11 Click Yes.
The driver installation is complete.
To confirm successful installation, double-click the Network
icon in the Control Panel. Click the Adapters tab. The
3C900B NIC should appear on the list. If it is not on the list,
see Chapter 3 for troubleshooting information.
Windows NT 3.51 Follow these steps to install the network driver in a PC
running Windows NT 3.51:
1 Install the NIC, connect to the network, and turn the
power on.
2 In the Main window of the Program Manager,
double-click the Control Panel icon and then
double-click the Network icon.
The Network Settings window appears.
If you are replacing a NIC that was previously installed,
follow these steps. Otherwise, go to step 3:
aSelect the existing NIC in the Installed Adapters Cards
group.
bClick Remove.
cClick Yes in the confirmation window.