WARNING: For the router and firewall mode, do not use the same subnet for LAN 1 and LAN 2 or the console will become inaccessible.
D.Enter the Primary IP address of the first DNS name server. The R3000 uses this name server to resolve the domain name requested by users from the LAN.
E.Enter the Secondary IP address of the second DNS name server. The R3000 will use this name server to resolve the domain name requested by users from the LAN if the first DNS isn’t working.
F.Enter the Gateway IP address for the default router or firewall that is the main gateway for the entire network. The R3000 will use this IP address to communicate outside the network.
WARNING: Be sure to take note of the LAN 1 and LAN 2 IP addresses and host name you assigned to the R3000. It is strongly suggested you document and store this information as it is now the only way of communicating with the R3000.
G. Click Apply.
Network: NTP Servers
From the navigation panel, click Network and choose NTP Servers from the
8e6 R3000IR Quick Start Guide | 37 |
