8e6 R3000iR Quick StaRt Guide 53
ConClusIon
Congratulations; you have completed the R3000IR quick start procedures. Now that the
R3000 and ER are set up on your network, once the ER database is populated with logs
from the R3000, the client can be used for generating reports.
Initially, you will only be able to report on IP addresses. To implement user names in ER
reporting, please consult the ER Administrator User Guide.
Refer to the ER Web Client User Guide for information on generating reports.
NOTE: If you cannot view reports, or if your specic environment is not covered
in the ER Administrator User Guide, contact an 8e6 Technologies solutions engineer
or technical support representative. Port 22 (SSH) and Port 3306 (SQL) must be
open on your network to allow access by remote technical support.