Login screen
The login screen displays after powering on the R3000IR unit using a monitor and key- board, or after creating a HyperTerminal session.
NOTE: If the screensaver currently displays on your screen, press the Enter key to display the login screen.
A.At the login prompt, type in menu.
B.Press the Enter key to display the Password prompt.
C.At the Password prompt, type in the following: #s3tup#r3k
D.Press Enter to display the Quick Start menu screen.
Quick Start menu screen
A.At the Press the number of your selection prompt, press 2 to select the Quick Start setup process.
B.At the login prompt,
C.Press Enter to display the administration menu where you can begin using the Quick Start setup procedures.
8e6 R3000IR Quick Start Guide | 25 |
