gis
1 Introduction
1.1About the appliance
0063
1.2What to do if you smell gas
1.3Regulations
This manual describes how to install, service and use the SGE appliance. The SGE appliance is a condensing boiler with a fan in the air intake. The water is heated partly by means of an external heat exchanger that can be connected to e.g. a solar energy source.
The SGE can be installed as either an open or
The alternative installation types are B23, C13, C33, C43, C53 and C63. The information in this manual applies to the: SGE 40 and SGE 60.
The appliance has been manufactured and equipped in accordance with the European standard for
Warning
Read this manual carefully before starting up the water heater. Failure to read the manual and to follow the printed instructions may lead to personal injury and damage to the appliance.
Warning
If there is a gas smell:
No naked flames! No smoking!
Avoid causing sparks! Do not use any electrical equipment or switch, i.e. no telephones, plugs or bells
Open windows and doors!
Shut off the mains gas supply valve!
Warn occupants and leave the building!
After leaving the building, alert the gas distribution company or your installation engineer.
As the (end) user, installation engineer or service and maintenance engineer, you must ensure that the entire installation complies, as a minimum, with the official local:
•building regulations;
•energy supplier's directives for existing gas installations;
•directives and technical guidelines for natural gas installations;
•safety requirements for
•regulations governing the supply of drinking water;
•regulations governing ventilation in buildings;
•regulations governing the supply of air for combustion;
•regulations governing the discharge of products of combustion;
•requirements for installations that consume gas;
•regulations governing indoor waste water disposal;
•regulations imposed by fire brigade, power companies and municipality.
Instruction manual SGE | 9 |