| 11 |
| Main menu |
|
|
If the water temperature becomes too low during the extra period (11.11 "Programming an extra period"), the appliance will run through the heating
cycle (9.3 "The appliance's heating cycle") and fall back into the extra period.
The same settings can be made for an extra period as for a week program (11.7 "Changing the appliance's standard week program") period.
11.11 Programming an extra period
1.Call up the menu for entering an extra period via:
2.
: EXTRA PERIOD
Confirm with 
.
MENU
ON
^WEEK PROGRAM ȻEXTRA PERIOD
The display show the settings for the extra period.
Setting the switch-on time
1.Use 
and 
to set the day. In the example this is
SU.
Confirm with 
.
The cursor moves to the hour digits, which flash.
ON | SU»00:00 |
|
OFF | SU 00:59 |
|
Tset | 65ÉC |
|
PUMP | ON | START |
|
|
|
2.Use 
and 
to set the
Confirm with 
.
The cursor moves to the minute digits, which flash.
ON | SU 08»00 |
|
|
OFF | SU 08:00 |
|
|
Tset | 65ÉC |
|
|
PUMP | ON | START |
|
|
|
|
|
Note
Because the
3.Use 
and 
to set the minutes. In the example, this is 15.
Confirm with 
.
The cursor moves to the hour digits of the switch- off period.
ON | SU 08:15 |
|
OFF | SU»08:15 |
|
Tset | 65ÉC |
|
PUMP | ON | START |
|
|
|
gis
Setting the switch-off time
1.Use 
and 
to set the hours. In the example, this is 012.
Confirm with 
.
The cursor moves to the minute digits, which flash.
ON | SU 08:15 | |
OFF | SU | 12»15 |
Tset | 65ÉC | |
PUMP | ON | START |
|
|
|
2.Use 
and 
to set the minutes. In the example, this is 45.
Confirm with 
.
The cursor moves to the water temperature. See the figure
ON | SU 08:15 | |
OFF | SU | 12:45 |
Tset»65ÉC | ||
PUMP ON | START | |
|
|
|
Setting the water temperature
1.Use 
and 
to set the water temperature. In the example this is 75°C.
Confirm with 
.
The cursor moves to PUMP ON
ON SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP»ON START
Setting the program-controlled pump
1.If required, a pump can be controlled during the period. Use 
and 
to set PUMP ON. The pump ensures a regular circulation of hot water in the hot water pipes. You can skip this step if you there is no pump in your hot water circuit.
Confirm with 
.
The cursor moves to START.
ON SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP ON »START
2. Confirm with 
.
The extra period has been programmed.
Note
Once the extra period has completed running, the controller returns to the mode ON, OFF or
WEEK PROGRAM. The following week, the extra period will NOT be automatically switched on.
70 | Instruction manual SGE |
