Acer G540 Series manual

43

(3)Connect the other end of the SAS/SATA2 cable to the SAS1-1 connector of the SAS controller board.

4Remove the HDD cage bay plastic cover from the front bezel.

(1)Use a flat-blade screwdriver to disengage the tabs on the top edge of the cover from its bezel slots.

(2)Detach the cover from the bezel.

Store this cover for future reinstallation.

5Observe the post-installation instructions described on page 38.

For instructions on how to install a hard drive in an easy-swap HDD cage, go to page 47.

For instructions on how to install a hard drive in a hot-plug HDD cage, go to page 45.