62 | 3 System upgrade |
Installing the SAS controller board
If you intend to install a SAS hard drive, you need to first install the LSI 1068 SAS controller board option.
To install the SAS controller board:
1Perform the
2Locate the SODIMM slot. If necessary, remove any cables that prevent access to it.
3Remove the SAS controller board from its protective packaging, handling it by the edges.
4Install the SAS controller board.
(1)Align then insert the
(2)Firmly press the board down to seat it properly.
(3)Secure the board with the one screw.
5Observe the
When you turn on the system, the BIOS setup automatically detects and assigns resources to the new device.
For information on how to install a SAS HDD, go to page 45.