90 |
| 4 System BIOS |
|
|
|
Parameter | Description | Option |
|
|
|
Supervisor | This parameter indicates whether a | Clear |
Password Is | supervisor password has been assigned. | Enabled |
|
|
|
User Password Is | This parameter indicates whether a user | Clear |
| password has been assigned. | Enabled |
|
| |
Set Supervisor | Press Enter to configure the supervisor password. | |
Password |
|
|
|
|
|
Set User | Press Enter to configure the user password. |
|
Password |
|
|
|
|
|
Password On | Select Enabled to activate security check | Disabled |
Boot | during POST. | Enabled |
|
|
|
Setting a system password
1Use the up/down keys to select a password parameter (Set Supervisor Password or Set User Password), then press Enter.
A password box will appear.
2Type a password then press Enter.
The password may consist of up to six alphanumeric characters
3Retype the password to verify the first entry then press Enter again.
4Press F10.
5Select Yes to save the new password and close the Setup Utility.
