49
5Remove the two screws that secure the cover of the empty 5.25-inch drive bay (1), then detach the cover (2).
Keep this cover for future reinstallation.
6Install the new 5.25-inch storage device.
The instructions given below apply to a regular 5.25-inch storage device. If you intend to replace or install a floppy drive, refer to the documentation that came with the new drive for instructions on how to set up the FDD conversion kit.
(1)Install the new 5.25-inch drive into the drive bay.
(2)Move the release slider into the lock position 
.
(3)Connect the power and IDE cables to the new 5.25-inch drive. 7 Observe the post-installation instructions described on page 38.
