58 | 3 System upgrade |
4Remove the FBD.
(1)Press the holding clips on both sides of the socket outward to release the DIMM.
(2)Gently pull the DIMM upward to remove it from the socket.
5If you intend to install a new FBD, proceed to the next section for related procedure, otherwise reinstall the air duct, then observe the
To install an FBD:
1Perform steps 1 through 3 of the previous section.
2Select an empty FBD slot.
3If necessary, open the holding clips of the selected FBD slot.
4Remove the new FBD from its protective packaging, handling it by the edges.
5Install the FBD.
(1)Align the FBD so that the notch on the slot fits the keyed edge of the module, then press the module at both ends to seat it fully into the slot.
If you insert an FBD but it does not fit easily into the slot, you have inserted it incorrectly. Reverse the orientation of the module and insert it again.
