57
•Install FBD pair upgrades in the following sequence:
–First FBD pair: DIMMA1 and DIMMB1 slots
–Upgrade 1: DIMMC1 and DIMMD1 slots
–Upgrade 2: DIMMA2 and DIMMB2 slots
–Upgrade 3: DIMMC2 and DIMMD2 slots
To remove an FBD:
Important: Before removing an FBD, make sure to back up all important system files. Also, note that FBDs should be removed in pairs.
1Perform the
2Lay the server on its side (components showing).
3Remove the air duct to access to the FBD slots.
(1)Remove the three screws that secure the air duct.
(2)Detach the air duct from the heat
