
48 | 3 System upgrade |
Configuring a 5-25 inch storage device
The three
By default, the system ships with a
To install an optional storage device:
1Perform the
2If you intend to replace a default storage
If you intend to install a new storage device on the middle device bay, go to step 5.
3Disconnect the power and data cables (IDE or FDD data cable) from rear of the old drive.
4Remove the default drive you intend to replace.
(1)Move the release slider of the selected drive to the unlock position .
(2)Pull the drive out of the device bay.
The figure below shows how to uninstall the DVD-ROM drive.
Proceed to step 6 for instructions on how to install a new storage device.