Acer G540 Series manual 3F8/IRQ4, Output only, 378

82		4 System BIOS
Parameter	Description	Option

Base I/O address Base I/O address and IRQ setting for the

selected serial port

3F8/IRQ4

2F8/IRQ3

3E8/IRQ4

2E8/IRQ3

Parallel Port	When enabled allows you to configure	Enabled
	the parallel port settings.	Disabled

Mode Sets the operation mode for the parallel port.

When set to Bi-Directional, allows normal speed operation in a two way mode.

When set to EPP (Enhanced Parallel Port), allows bi-directional parallel port operation at maximum speed.

When set to ECP (Extended Capabilities Port), allows the parallel port to operate in a bi-directional mode and at a speed higher than the maximum data transfer rate.

Output only

Bi-Directional

EPP

ECP

Base I/O	Base I/O address of the parallel port	378
Address		278
Interrupt	IRQ setting of the parallel port	IRQ5
		IRQ7
PS/2 Mouse	Enable this parameter if you intend to	Enabled
	use a mouse or trackball with a PS/2	Disabled
	interface.
USB Controller	Enables or disables the onboard USB	Enabled
	controller.	Disabled
USB 2.0	Enables or disables the onboard USB	Enabled
Controller	2.0 controller.	Disabled
Legacy USB	Enables or disables support for legacy	Enabled
Support	USB devices.	Disabled
Route Port 80h	Select which bus to set the route port	PCI
Cycles to	80h cycles on.	LPC