ADC H4TU-C-319 List 1 Line Unit, HDSL4 user manual Provisioning Tasks, Setting Date and Time

LTPH-UM-1031-03, Issue 3 Provisioning

PROVISIONING TASKS

After the H4TU-C-319 is successfully installed, perform these basic provisioning tasks:

1Set the date and time (see “Setting Date and Time” on this page).

2Set the circuit ID numbers (see “Setting Circuit ID Numbers” on page 16).

3Make any desired changes to configuration (see “Configuring the System” on page 17).

4Clear history, alarm, and event log screens to remove miscellaneous data during startup (see “Clearing the History, Alarm, and Event Log Screens” on page 24).

Setting Date and Time

Monitor	Performance Event Log	Config	Inventory	Report Rlogon		Help
	----------------------+				+
		Standard Options ->
		ADC Options		->
	BERT Generator			->
		Date and Time		->

+-------------------------------		+
Date (mm/dd/yyyy):	02/01/2002
Time (hh:mm[:ss]):	12:30:01
+-------------------------------		+

ID: xxxx--xxxx—-xxxx--xxxx 02/01/2002 12:30:01 H4TU-C System: OK___

Figure 4. Config Menu - Date and Time

1Press C to select the Config menu.

2Use the ↑ and ↓ arrow keys to select Date and Time, then press ENTER .

3Type the date in the format indicated, then press ENTER .

4Type the time in the format indicated (entering seconds is optional), then press ENTER .

H4TU-C-319 List 1 September 12, 2003 15