ADC H4TU-C-319 List 1 Line Unit, HDSL4 user manual Resetting to Factory Defaults

LTPH-UM-1031-03, Issue 3 Provisioning

Changing these Power Back Off option settings on a live circuit causes the HDSL4 loop to momentarily drop and then reacquire synchronization. This setting can also affect the operating margins.

Resetting to Factory Defaults

Resetting the H4TU-C to its original factory settings may cause interruption of service.

To reset the H4TU-C-319 to its original factory defaults:

1Press C to select the Config menu.

2Use the ↑ and ↓ arrow keys to select Set Factory Defaults, then press ENTER .

3Press Y if you are certain you want to reset the H4TU-C, or press N to cancel this action.

Monitor	Performance Event Log	Config	Inventory	Report Rlogon			Help
	----------------------+				+
		Standard Options ->
		ADC Options		->
	BERT Generator			->
		Date and Time		->
	Master Clear
		Set Factory Defaults
----------------------+						+

SETTING FACTORY DEFAULTS...	SERVICE MAY BE INTERRUPTED! ARE		YOU SURE (Y/N)?
ID: xxxx--xxxx—-xxxx--xxxx	02/01/2002 12:30:01	H4TU-C	System: OK___

Figure 9. Config Menu - Set Factory Defaults

H4TU-C-319 List 1 September 12, 2003 23