Table of Contents |
| |
| Software Version | 26 |
| Loopback Both DTEs | 26 |
| Test 2047 Both | 26 |
Chapter 6. Configuration | 27 | |
Dial Line Operation | 27 | |
| Setting the Switch Protocol | 28 |
| Setting the Call Type | 31 |
| Speech | 31 |
| Audio | 31 |
| Data 56kbps | 31 |
| Data 64kbps | 31 |
| Smart Dial Strings | 32 |
| Setting the Terminal ID | 32 |
| Setting the SPID | 32 |
| Setting the LDN | 33 |
| Setting the Busy Out Port | 33 |
| Enabled | 34 |
| Disabled | 34 |
| Setting the Dial Options | 34 |
| Front Panel | 34 |
| 34 | |
| AT Commands | 36 |
| V.25 | 39 |
| Disabled | 42 |
| Setting Auto Answer | 42 |
| Disabled | 42 |
| Enabled | 43 |
| Dump all calls | 43 |
| Setting Answer Tone | 43 |
| No Answer tone (Default) | 44 |
| Incoming tone | 44 |
| Outgoing tone | 44 |
| Always tone | 44 |
| Setting Connect Timout | 45 |
| Setting Call Screening | 45 |
| SBus Termination | 46 |
Leased Line Service | 47 | |
| Clock Mode: Slave/Master | 47 |
| Channel Rate | 48 |
| SBus Termination | 49 |
| DTE Options for Asynchronous and Synchronous Operation | 50 |
| Bit Rate | 51 |
| Connector Type | 51 |
| RTS Options | 51 |
| CTS Options | 51 |
| CD Options | 51 |
| DTR Options | 52 |
ii | ISU 2x64 Dual Port ISDN Service Unit User Manual |