Chapter 8. Quick Setup
Dial 115.2 asyn*
When the ISU 2x64 is configured for Dial 115.2 asyn service, the following parameters are automatically preset:
Service type | ISDN dial line |
ISDN call type | 64 kbps data |
Protocol | BONDING mode 1 |
DTE mode | Asynchronous |
Data Bits | 8 |
Parity Bits | none |
Stop Bits | 1 |
DTE connector bit rate | 115.2 kbps |
DTE flow control | none |
RTS line | 1 mS delay |
CTS line | Forced On |
Dialing Mode | AT Commands |
Fallback 57.6k*
When the ISU 2x64 is configured for FALLBACK 57.6K service, the following parameters are automatically set:
Service type | Dial line |
Automatic answering | Yes |
ISDN type | 64 kbps data |
Data protocol | Fallback |
DTE mode | Asynchronous |
Data bits | 8 |
Parity bits | none |
Stop bits | 1 |
DTE connector rate | 57.6 kbps |
DTE flow control | Hardware |
RTS line | 1 mS delay |
CTS line | Follows RTS |
Dialing Mode | AT Commands |
ISU 2x64 Dual Port ISDN Service Unit User Manual | 69 |
