ADTRAN ISU 2X64 user manual Is set

Appendix D: S-Register List

S6.........DTR DIAL DELAY	Delay time in minutes between consecutive outgoing
	calls when DTR is set for Dial #0 if on option.
S7.........CONNECT TIME	Determines how long the ISU 2x64 waits for an out-
	going call to be answered.
	15	= 15 seconds
	30	= 30 seconds (default)
	60	= 1 minute
	120	= 2 minutes
	240	= 4 minutes

S9.........CLEAR CHAN DELAY The value multiplied by eight determines the number

	of bytes between receive data and transmit data.
S10.......DISABLE REMOTE	Disables the two-second delay at the beginning of
CONFIG	each incoming call that scans for remote configuration
	data. FALLBACK protocol cannot be used when this option
	is set!
	0 = Remote Config enabled
	1 = Remote Config disabled
S12.......ESCAPE TIME	Determines the delay required immediately before
	and after entering the escape command for the ISU
	2x64 to recognize and execute the command.
	Range = 0 to 127 (default = 1 second)
S14.......MISC BITS	Miscellaneous bits (bit 8 is most significant bit) .
	Bit 2 = 1:enables on screen echo of AT commands.
	Bit 2 = 0: disables on screen echo of AT commands.
	Bit 3 = 0: enables AT responses from the ISU 2x64.
	Bit 3 = 1: disables AT responses from the ISU 2x64.
	Bit 4 = 1: enables AT responses to be displayed
	in text form.
	Bit 4 = 0: enables AT responses to be displayed in nu-
	meric form.

S15.........ASYNC BONDING REV Determines the revision level Bonding negotiates

for asynchronous connections.

0 = ADTRAN orginal Async. Bonding

1 = Multivendor Async. Bonding (default)

110 ISU 2x64 Dual Port ISDN Service Unit User Manual 61200051L1-1D